Muc-Off Bio Grease - Superior Bicycle Lubrication

Enhance the longevity and performance of your bike with Muc-Off Bio Grease, designed to tackle the unique demands of bicycle maintenance. This biodegradable grease offers exceptional protection against corrosion and water ingress, ensuring your bike's components remain in optimal condition. Its eco-friendly formula is crafted from renewable resources, providing superior lubricity and reducing friction in low-speed applications.

• Biodegradable and free from petroleum-based oils
• Resistant to water wash-off for lasting protection
• Not recommended for use on bicycle chains

Muc-off's C3 Ceramic Wet Lube is a premium bike chain lubricant that creates a ceramic coating for the ultimate chain performance in wet weather conditions.

HIGHLIGHTS
Specifically formulated to excel over long distances in wet and muddy conditions
Contains UV dye so that you can check to ensure maximum coverage
Ceramic coating provides increased drive chain protection

FEATURES
Ideal chain lubricant for Road Cycling, Cyclocross & MTB
Excels in wet, muddy conditions
Contains Boron Nitrides for efficiency
Creates Ceramic coating for chain protection
Ultra long distance performance
Incredible durability
Pipette system for accurate, easy application
Includes UV torch to check for 100% coverage

HOW TO
Clean drive chain thoroughly before lube application
Ensure drive chain area is dry
Apply a moderate amount of C3 Ceramic Wet Chain lube to the inside chain link while spinning pedals in a reverse motion
Check to make sure the lube coverage is even using the supplied UV Torch!
Wipe away any excess chain lube

The Muc-Off Carbon Gripper is an innovative solution designed to enhance the performance and longevity of carbon fiber bike components. This advanced compound prevents slipping and over-tightening by increasing friction between carbon surfaces, making it an essential tool for cyclists and mechanics.

Ideal for use on carbon seatposts, stems, and handlebars, the Carbon Gripper optimizes clamping torque to reduce the risk of fatigue and internal fractures. Whether you're building a bike or maintaining existing parts, this product ensures your components are securely fastened without compromising their integrity.

• Improves grip on carbon fiber parts
• Reduces clamping torque to prevent damage
• Essential for carbon to carbon or carbon to metal interfaces

Ceramic Protection Kit for Ultimate Surface Care

The Muc-Off Ceramic Protection Kit offers a cutting-edge solution for safeguarding your vehicle's surfaces. This silicon-infused ceramic coating forms a durable, hydrophobic layer that bonds chemically to paintwork, ensuring maximum water and dirt repulsion. Designed for longevity, it provides year-round protection against harsh weather conditions and UV rays, helping prevent paint fade and micro scratches.

• Suitable for use on paintwork, carbon fiber, metal, wheels, vinyl, and rigid plastics.
• Protection lasts up to 2 years, maintaining a polished look with minimal maintenance.
• Effective on both gloss and matt finishes, enhancing color richness on matt surfaces.

Muc-Off Chamois Cream is designed to enhance your comfort during cycling, triathlons, running, or any endurance sport. This luxury cream creates a friction-reducing barrier, helping to prevent saddle sores and chafing.

Formulated with natural ingredients, it is gentle on the skin and provides long-lasting protection. The cream is easy to apply and is suitable for all types of skin.

• Reduces friction and chafing
• Contains natural ingredients
• Suitable for all endurance sports

Muc-Off Luxury Chamois Cream for Ultimate Comfort

Experience unmatched comfort on your rides with the Muc-Off Luxury Chamois Cream 250ml (8.4oz). This cream is specially formulated to provide deep moisturization, ensuring your skin stays protected and friction-free, even during the longest rides.

Apply this cream to your skin and cycling short chamois just 5 minutes before hitting the road, and enjoy a ride free from saddle sores.

• Deeply moisturizing for total riding comfort
• Reduces friction naturally with a luxurious formulation
• Features a mild cooling effect for extra comfort

The Muc-Off 25g CO₂ MTB Cartridge Mini Pump Refill is an essential tool for cyclists who want to quickly inflate their tires and get back on the road. These cartridges are designed to work seamlessly with the Muc-Off CO2 Inflator Kit, ensuring a fast and efficient inflation process.

Each cartridge contains 25 grams of carbon dioxide, providing enough pressure to inflate a tire up to 30 psi from flat. Whether you're commuting or out on a long mountain bike ride, these cartridges are the perfect companion to prevent punctures from ruining your day.

• Compatible with Muc-Off CO2 Inflator Kit
• Inflates tires up to 30 psi
• Compact and easy to carry

Enhanced Braking Efficiency with Muc-Off Disc Brake Cleaner

The Muc-Off Disc Brake Cleaner is engineered to improve your bike's braking performance by swiftly removing brake dust, oil, dirt, and grime from all brake components. Its unique formula not only cleans but also rehydrates the disc brake pads, reducing brake squeal and prolonging the life of your disc pads.

Designed to air-dry quickly without leaving any residue, this cleaner is safe for use on rubber, plastic, and carbon fiber components.

The Muc-Off Disc Brake Covers are designed to protect your bike's disc brakes from overspray of protectants and lubes during maintenance or transit. These innovative covers are easy to use, featuring a convenient velcro fastening and a stylish printed design.

Perfect for road and mountain bikes, these covers fit all disc brake rotors and are made from breathable neoprene that helps prevent corrosion. They are also washable and reusable, ensuring your braking power remains uncompromised.

• Fast and easy application with velcro fastening
• Breathable neoprene material protects against corrosion
• Designed for both road and mountain bike rotors
• Washable and reusable for long-term use

Muc-Off Bio Drivetrain Cleaner

The Muc-Off Bio Drivetrain Cleaner is an essential solution for maintaining your bike's drivetrain. This versatile cleaner can be used with a chain cleaning device or sprayed directly onto components like the chain, chain rings, cassette, and derailleurs. Its biodegradable formula ensures that it is safe for metal, plastic, rubber, and seals, providing a thorough clean without damaging sensitive parts.

• Efficiently cleans your entire drivetrain in seconds
• Biodegradable contents, safe for various materials
• Best results when used with Muc-Off X-3 Dirty Chain Machine

The Muc-Off eBike All-Weather Lube is designed to meet the demanding conditions faced by eBike riders. This high-performance synthetic lube is engineered to handle the high torque loads of eBike chains, ensuring smooth and efficient drivetrain operation.

Its unique water repellent, non-fling formula penetrates deeply to create a durable protective coating that guards against corrosion and wear. Perfect for long-distance rides, on or off-road, in any weather condition.

• Specifically formulated for eBike chains
• Long-lasting protection against metal-to-metal contact
• Contains Boron Nitride for enhanced lubrication
• Reduces friction and improves drivetrain efficiency

Muc-Off eBike Essentials Kit

The Muc-Off eBike Essentials Kit is the ultimate package for eBike owners who want to maintain their ride with top-quality products. Engineered to handle the extra power of an electric motor, this kit includes everything you need to keep your eBike clean and well-lubricated regardless of the weather conditions.

From specialized cleaners to durable brushes and sponges, this bundle ensures your eBike is always in peak condition. The kit also features specific lubes tailored for eBikes, providing enhanced protection and performance.

• Comprehensive kit for cleaning and maintaining eBikes
• Includes cleaners, sponges, brushes, and eBike-specific lubes
• Designed to handle the demands of electric motors
• Suitable for all weather conditions

Take your bike cleaning regime to the next level with our versatile, quality and great value 5 Premium Brush Kit. Ideal for agitating dirt while caring for your bike's delicate finish.

HIGHLIGHTS
Premium brushes with ergonomic design
5 brushes specifically designed for bikes
Ideal for giving your bike an all-over clean

DESCRIPTION
Our Soft Washing Brush with sintered bristle compound is designed to clean your frame and components while caring for delicate finishes. It’s all new design features a tough, impact resistant handle that won't slip in extreme conditions, an oversized head for fast cleaning of large areas and rubberised impact zones for maximum protection.

Our Detailing Brush is ideal for reaching hard-to-shift dirt on sprockets, hubs and other tight areas such as suspension mounts or fork crowns. It’s new design features a tough, impact resistant handle that won't slip in extreme conditions, durable nylon bristles and rubberized impact zones for maximum protection on delicate finishes.

Our Claw Brush features high quality construction with triple brush heads with tough nylon bristles and an integral scraper for mud de-clogging. It’s ideal for chain, cassette and sprockets, and it’s even 10-speed compatible.

Our Wheel & Component Brush is shaped and contoured specifically to clean rims and spokes with ease. Its unique design features an impact-resistant, dual density handle and durable nylon bristles.

Our Two Prong Brush is ideal for reaching hard-to-shift dirt on spokes, discs, shocks, cranks, linkages and pedals. It’s design features a tough, impact resistant handle that won't slip in extreme conditions and durable nylon bristles. The twin brush heads can be altered and repositioned to reach the tightest of areas.

NB: To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use.

FEATURES
Great Values- Save £9!
Sintered bristle compounds for safe cleaning
Rubberised impact zones for maximum protection
Nylon bristles for durability
Contains Two Prong, Detailing, Soft Washing, Claw and Wheel & Component brushes

WHAT'S INCLUDED?
Soft Washing Brush
Detailing Brush
Claw Brush
Wheel & Component Brush
Two Prong Brush

The Muc-Off Hydrodynamic Chain Lube is a high-performance lubricant designed for ultimate efficiency in all weather conditions. Engineered with advanced synthetic polymers, this lubricant ensures long-distance performance and protection.

Developed in collaboration with Team Sky, it provides a durable, high-strength film to prevent metal-to-metal contact, even under intense workloads. Perfect for road cycling and cyclocross, this petroleum-free formula is both eco-friendly and delivers exceptional durability.

• Ideal for use in wet, damp, dry, and dusty conditions
• Includes a pipette system for easy application
• Handmade in the UK with aerospace-quality additives

DESCRIPTION
Fingerprints and glossy marks are now a thing of the past. Matt Finish Detailer has been specifically developed for satin matt paints, matt finishes and matt vinyl wraps. The premium-grade formula will leave any matt surface with a streak and gloss-free protective finish that reduces dirt adhesion.

PRODUCT INFORMATION
CHEMTREC: 1-800-424-9300, 24 HR

KEEP OUT OF REACH OF CHILDREN​

FEATURES
Quick to use spray developed specifically for matt finishes
Leaves a non-sticky, streak and gloss-free protective finish
Available in 250ml
Carbon Fibre safe
*Biodegradable
*Only contents are biodegradable.

HOW TO
Step 1 - Shake bottle vigorously.
Step 2 - Ensure surface is clean, cool and dry. Now apply Matt Finish Detailer to all matt finishes.
Step 3 - Wipe with a microfibre cloth and leave to dry.
Note: Mask braking surfaces before application.

This product has a Project Green credential; meaning that it’s either biodegradable, refillable, reusable, or all three!

MO-94 The all round wonder spray! Take a closer look at what makes this tool box in a can the perfect protective spray for all things two or four wheeled.

HIGHLIGHTS

Free seized parts
Prevents dirt adhesion
Cuts down on friction to improve component efficiency

Looking for an all round wonder spray? Look no further! Muc-Off MO-94 covers all the bases with it's incredible formula that quickly and effectively penetrates moisture, lubricates moving parts and leaves a long lasting protective film. MO-94 prevents dirt adhesion and also drives out excess water to keep rust and corrosion at bay. MO-94 isn’t just for bikes, motorcycles or cars. Nope. It works on just about anything. Whether you’ve got a squeaky door hinge, a rusty lock or a bolt that you just can’t turn, MO-94 is all you need.

*Just remember not to apply MO-94 to your bike’s tire treads and braking surfaces!

FEATURES
Free's seized parts
Disperses moisture to prevent rust and corrosion
Provides light lubrication for moving parts
Reduces metal to metal contact
Prevents dirt adhesion
Cuts down on friction to improve component efficiency
Weight - 400g
Biodegradable*
* Contents only.

HOW TO
Apply Disc Brake Covers to prevent over-spray and contaminating your discs and pads
Spray MO-94 over the desired area for treatment
You can use the pink directional straw for smaller, harder to reach parts
Allow area to dry
Wipe away any excess using a microfiber cloth

Muc-Off MTB CO² Inflator Kit for Quick Tire Inflation

The Muc-Off MTB CO² Inflator Kit is designed to help mountain bikers rapidly inflate their tires and get back on the trail in no time. The kit includes a durable CNC-machined inflator head with a soft-touch button for controlled CO² release, making it an essential tool for any cyclist.

• Includes 2x 25g cartridges for MTB tires
• Compatible with both Presta and Schrader valves
• Comes with a neoprene sleeve to prevent freeze burn

The OG of bike cleaners, often imitated never duplicated.

HIGHLIGHTS
Breaks down dirt and grime on a molecular level
Fully biodegradable, free from acids, solvents and CFCs
Safe on all surfaces, including carbon fiber

Using our state-of-the-art Nano Tech formula, Muc-Off cuts through grime quicker than you can say “OMG!” regardless of the weather or riding conditions. This classic pink Bike Cleaner has incredible cleaning power because it contains revolutionary Nano Technology that breaks down dirt and grime on microscopic levels, while also caring for your bike’s delicate finish. Because we use the finest ingredients and surfactants, our Muc-Off formula is a closely guarded trade secret.

It’s the most effective cleaner out there, and it doesn’t even need any of those nasty, dangerous acids or chemicals. In fact, our perfectly pink cleaner is *biodegradable, free from acids, CFC’s and solvents, and it’s alkaline based so you can clean away with a guilt-free conscience. It’s safe on all surfaces, and it’s even disc brake rotor and pad friendly.

*Only contents are biodegradable.

Contains: Tetrasodium ethylene diamine tetraacetate and Alcohols, C12-14, ethoxylated, sulfates, sodium salts. Avoid contact with the eyes. Avoid prolonged skin contact.

KEEP OUT OF REACH OF CHILDREN.

FIRST AID: Eye Contact: Immediately flush eyes with water for at least 15 minutes. Get medical attention if irritation persists. Skin Contact: Rinse with water. Get medical attention if irritation persists. Ingestion: Do not induce vomiting. Call a physician or poison center for advice.

CHEMTREC: 1-800-424-9300, 24 HR.

WARNING: Cancer - www.P65Warnings.ca.gov

Only contents are readily biodegradable to internationally recognized standards.

FEATURES
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, brake pads or rotors
Safe on anodised metal
Alkaline based and free from CFCs, solvents or acids
Nano Tech Formula cleans on a molecular level
Biodegradable*

HOW TO
Rinse bike thoroughly before applying Nano Tech Bike Cleaner
Spray Nano Tech Bike Cleaner onto the entire bike including components and leave for 3-5 minutes
Agitate any stubborn grime with a brush or sponge
Rinse entire bike thoroughly with fresh, clean water

MTB Tubeless Sealant for Ultimate Puncture Protection

The Muc-Off No Puncture Hassle Tubeless Tire Sealant is designed for those who demand reliability under extreme conditions. This lightweight sealant excels with cutting-edge molecules that fill larger punctures, while advanced latex provides a rapid seal. A unique UV detection system reveals any unseen punctures, ensuring peace of mind on your rides.

• Developed with top cyclists for superior performance
• Non-corrosive and easily washable with water
• Compatible with tubeless ready and UST wheels/tires
• Operates effectively from 15psi to 80psi and temperatures from -20°C to +50°C
• Conveniently sized 140ml pouch fits perfectly with Presta valves

The Muc-Off Puncture Plugs Refill Pack is an essential accessory for cyclists who use tubeless tires on road, MTB, and gravel bikes. This refill pack ensures you're always prepared to handle punctures swiftly and efficiently.

The pack includes 10 repair plugs, with 5 thin plugs and 5 thick plugs, offering versatility to tackle various puncture sizes. Designed to be compatible with all tubeless tires, this refill pack is an excellent addition to your cycling toolkit.

• Contains 5 thin plugs and 5 thick plugs for versatile repairs
• Compatible with tubeless road, MTB, and gravel tires
• Essential for maintaining tire integrity during rides

Muc-Off Rim Stix Tire Levers Set

The Muc-Off Rim Stix Tire Levers are expertly designed for quick and safe tire removal. Crafted from high-strength materials, these levers provide maximum leverage without risking damage to rims or pinching tubes. Whether tackling the toughest tires or dealing with everyday maintenance, these tire levers are your reliable companion.

• Engineered with a perfect scoop angle for effortless tire removal.
• Includes an integral emergency valve core remover and rear-spoke hook.
• Suitable for all tire and rim combinations, ideal for both the workshop and the wilderness.

SEMI-TRANSPARENT: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. It’s also the infamous Muc-Off pink so even the inside of your rims stay looking fresh AF.

SEAL PATCHES: Muc-Off Tubeless Rim Tape comes with four seal patches, so you’re never caught short.

HIGHLIGHTS

Pressure-sensitive adhesive, creating the ultimate seal
Semi-transparent to easily locate the valve hole
Comes with 4x seal patches

DESCRIPTION
The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

WHAT SIZE RIM TAPE DO I NEED?
The Tubeless Rim Tape that you go for should be matched up with the size of your wheel's internal rim width. You should be able to find this measurement on the inside of your rim, or alternatively check your bike's manufacturer's guide online. Failing that, it's time to dig out a trusty ruler and measure it yourself!

If your rim width doesn't match up exactly with our sizes below, just go for the next size up.

As a general guide:

Road/Gravel (17 & 21mm)
XC/Trail (25mm)
DH/Enduro (28 & 30mm)
DH/Enduro Wide (35mm)

FEATURES
The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
Comes with four seal patches, so you’re never caught short
Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
Extreme strength and durability
Pressure sensitive adhesive ensures the ultimate air-tight seal
Engineered to stretch to fit perfectly in the contour of your rim
Comes as 10m roll - allowing for 4 applications

HOW TO
First up, clean your rim using our Glue & Sealant remover to get rid of any unwanted residue that might be left behind from a previous setup
Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
Locate the valve hole
Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
Rotate the wheel around as you continue to apply the tape
Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
Cut the tape at a 45 degree angle and press the edge down
Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
Apply the finishing patch over the edge of the tape to ensure a firm seal
Push the valve through the rim hole and secure with the 'O' ring and locking ring
Refit the tire and inflate - you're now ready to add your sealant!

SEMI-TRANSPARENT: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. It’s also the infamous Muc-Off pink so even the inside of your rims stay looking fresh AF.

SEAL PATCHES: Muc-Off Tubeless Rim Tape comes with four seal patches, so you’re never caught short.

HIGHLIGHTS

Pressure-sensitive adhesive, creating the ultimate seal
Semi-transparent to easily locate the valve hole
Comes with 4x seal patches

DESCRIPTION
The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

WHAT SIZE RIM TAPE DO I NEED?
The Tubeless Rim Tape that you go for should be matched up with the size of your wheel's internal rim width. You should be able to find this measurement on the inside of your rim, or alternatively check your bike's manufacturer's guide online. Failing that, it's time to dig out a trusty ruler and measure it yourself!

If your rim width doesn't match up exactly with our sizes below, just go for the next size up.

As a general guide:

Road/Gravel (17 & 21mm)
XC/Trail (25mm)
DH/Enduro (28 & 30mm)
DH/Enduro Wide (35mm)

FEATURES
The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
Comes with four seal patches, so you’re never caught short
Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
Extreme strength and durability
Pressure sensitive adhesive ensures the ultimate air-tight seal
Engineered to stretch to fit perfectly in the contour of your rim
Comes as 10m roll - allowing for 4 applications

HOW TO
First up, clean your rim using our Glue & Sealant remover to get rid of any unwanted residue that might be left behind from a previous setup
Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
Locate the valve hole
Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
Rotate the wheel around as you continue to apply the tape
Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
Cut the tape at a 45 degree angle and press the edge down
Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
Apply the finishing patch over the edge of the tape to ensure a firm seal
Push the valve through the rim hole and secure with the 'O' ring and locking ring
Refit the tire and inflate - you're now ready to add your sealant!

SEMI-TRANSPARENT: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. It’s also the infamous Muc-Off pink so even the inside of your rims stay looking fresh AF.

SEAL PATCHES: Muc-Off Tubeless Rim Tape comes with four seal patches, so you’re never caught short.

VARIETY OF SIZES: We’ve developed our 10 metre Rim Tape roll in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

HIGHLIGHTS

Pressure-sensitive adhesive, creating the ultimate seal
Semi-transparent to easily locate the valve hole
Comes with 4x seal patches

DESCRIPTION
The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

WHAT SIZE RIM TAPE DO I NEED?
The Tubeless Rim Tape that you go for should be matched up with the size of your wheel's internal rim width. You should be able to find this measurement on the inside of your rim, or alternatively check your bike's manufacturer's guide online. Failing that, it's time to dig out a trusty ruler and measure it yourself!

If your rim width doesn't match up exactly with our sizes below, just go for the next size up.

As a general guide:

Road/Gravel (17 & 21mm)
XC/Trail (25mm)
DH/Enduro (28 & 30mm)
DH/Enduro Wide (35mm)

FEATURES
The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
Comes with four seal patches, so you’re never caught short
Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
Extreme strength and durability
Pressure sensitive adhesive ensures the ultimate air-tight seal
Engineered to stretch to fit perfectly in the contour of your rim
Comes as 10m roll - allowing for 4 applications

HOW TO
First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup
Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
Locate the valve hole
Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
Rotate the wheel around as you continue to apply the tape
Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
Cut the tape at a 45 degree angle and press the edge down
Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
Apply the finishing patch over the edge of the tape to ensure a firm seal
Push the valve through the rim hole and secure with the 'O' ring and locking ring
Refit the tyre and inflate - you're now ready to add your sealant!

SEMI-TRANSPARENT: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. It’s also the infamous Muc-Off pink so even the inside of your rims stay looking fresh AF.

SEAL PATCHES: Muc-Off Tubeless Rim Tape comes with four seal patches, so you’re never caught short.

VARIETY OF SIZES: We’ve developed our 10 metre Rim Tape roll in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

HIGHLIGHTS

Pressure-sensitive adhesive, creating the ultimate seal
Semi-transparent to easily locate the valve hole
Comes with 4x seal patches

DESCRIPTION
The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

WHAT SIZE RIM TAPE DO I NEED?
The Tubeless Rim Tape that you go for should be matched up with the size of your wheel's internal rim width. You should be able to find this measurement on the inside of your rim, or alternatively check your bike's manufacturer's guide online. Failing that, it's time to dig out a trusty ruler and measure it yourself!

If your rim width doesn't match up exactly with our sizes below, just go for the next size up.

As a general guide:

Road/Gravel (17 & 21mm)
XC/Trail (25mm)
DH/Enduro (28 & 30mm)
DH/Enduro Wide (35mm)

FEATURES
The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
Comes with four seal patches, so you’re never caught short
Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
Extreme strength and durability
Pressure sensitive adhesive ensures the ultimate air-tight seal
Engineered to stretch to fit perfectly in the contour of your rim
Comes as 10m roll - allowing for 4 applications

HOW TO
First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup
Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
Locate the valve hole
Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
Rotate the wheel around as you continue to apply the tape
Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
Cut the tape at a 45 degree angle and press the edge down
Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
Apply the finishing patch over the edge of the tape to ensure a firm seal
Push the valve through the rim hole and secure with the 'O' ring and locking ring
Refit the tyre and inflate - you're now ready to add your sealant!

SEMI-TRANSPARENT: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. It’s also the infamous Muc-Off pink so even the inside of your rims stay looking fresh AF.

SEAL PATCHES: Muc-Off Tubeless Rim Tape comes with four seal patches, so you’re never caught short.

VARIETY OF SIZES: We’ve developed our 10 metre Rim Tape roll in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

HIGHLIGHTS

Pressure-sensitive adhesive, creating the ultimate seal
Semi-transparent to easily locate the valve hole
Comes with 4x seal patches

DESCRIPTION
The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

WHAT SIZE RIM TAPE DO I NEED?
The Tubeless Rim Tape that you go for should be matched up with the size of your wheel's internal rim width. You should be able to find this measurement on the inside of your rim, or alternatively check your bike's manufacturer's guide online. Failing that, it's time to dig out a trusty ruler and measure it yourself!

If your rim width doesn't match up exactly with our sizes below, just go for the next size up.

As a general guide:

Road/Gravel (17 & 21mm)
XC/Trail (25mm)
DH/Enduro (28 & 30mm)
DH/Enduro Wide (35mm)

FEATURES
The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
Comes with four seal patches, so you’re never caught short
Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
Extreme strength and durability
Pressure sensitive adhesive ensures the ultimate air-tight seal
Engineered to stretch to fit perfectly in the contour of your rim
Comes as 10m roll - allowing for 4 applications

HOW TO
First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup
Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
Locate the valve hole
Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
Rotate the wheel around as you continue to apply the tape
Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
Cut the tape at a 45 degree angle and press the edge down
Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
Apply the finishing patch over the edge of the tape to ensure a firm seal
Push the valve through the rim hole and secure with the 'O' ring and locking ring
Refit the tyre and inflate - you're now ready to add your sealant!

The Muc-Off Inflator kits help riders quickly inflate their tyres and get back to riding in no time! Coming in 25g cartridge size for MTB and 16g for road inflating tyres up to 30psi and 100psi from flat respectively. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. Cartridges are also available separately.

WHAT'S INCLUDED
2x Muc-Off 16g CO Cartridges
CNC Machined Inflator Head
Neoprene Sleeve

No job - done well is complete without the finishing touches, and that's where Silicon Shine rolls in. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth ride with glistening results.

HIGHLIGHTS

Protects and leaves a sparkling shine on metal, plastic & rubber parts.
Reduces friction on fork stanchions and rear shocks
Silicon formula prevents grime build up on treated surfaces

DESCRIPTION
Silicon Shine not only leaves your bike looking factory fresh, but it also acts as an amazing friction reducer for suspension parts and reduces dirt adhesion. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth, World Cup performance.

PRODUCT INFORMATION
DANGER: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Keep out of reach of children

FEATURES
Protects and leaves a sparkling shine on metal, plastic & rubber parts.
Reduces friction on fork stanchions and rear shocks
Silicon formula prevents grime build up on treated surfaces
Cuts down on future cleaning and maintenance

HOW TO
Step 1 - Shake can to activate silicon formula and apply Silicon Shine to a clean surface.
Step 2 - Using a microfibre cloth, buff the surface to leave a dry, sparkling shine.
*Just remember not to apply Silicon Shine to your bike’s tire treads and braking surfaces!

Stealth Tubeless Puncture Plug by Muc-Off

The Muc-Off Stealth Tubeless Puncture Plug is a must-have tool for cyclists facing punctures that sealants can't handle. This innovative solution is cleverly housed within your bike's bar ends, ensuring you're always prepared for unexpected punctures. The lightweight and durable set includes various sized tire worms, a stainless steel 2-in-1 puncture plug reamer tool, and a trimming knife.

• Compatible with most MTB, road, and gravel handlebars
• Available in 12 anodized colors to match your bike
• Premium CNC Machined Aluminum bar ends

Protect your indoor training equipment from sweat and corrosion with Muc-Off Sweat Protect 300ml. This advanced formula uses anti-corrosion additives to stop rust and corrosion in its tracks, offering long-lasting protection for up to three months.

Simply apply it to your bike's frame, metal parts, or any gym equipment to create a moisture-repellent barrier.

• State-of-the-art anti-corrosion technology
• Protects metal surfaces from sweat-induced rust
• Easy application with 'Genius Straw' for precision
• Long-lasting protection up to 3 months

The two in one puncture plug/reamer tool is lightweight and easy to use. It has a tough, durable handle that ensures you can make light work of flats. 

HIGHLIGHTS
Compatible with Road Bikes, Gravel Bikes and MTBs with tubeless tire setups
Two in one reamer and plug tool
10x refill plugs included

DESCRIPTION
When a puncture is simply too big to seal, the Muc-Off Puncture Plug Repair Kit is the ultimate backup tool that’s lightweight and easy-to-use. The tough and durable handle and 2-in-1 puncture plug/reamer tool comes with 5x thick plugs and 5x thin plugs packed all packed together in a handy storage pouch. Compatible with all tubeless road, MTB and gravel tyres. Refill packs with 10 repair plugs (5x thin and 5x thick) available separately.

FEATURES
Compatible with Road Bikes, Gravel Bikes and MTBs with tubeless tire setups
Two in one reamer and plug tool
10x refill plugs included

WHAT'S INCLUDED
Puncture Plug
10x refill plugs included
Handy storage case

The Muc-Off Big Bore Lite Tubeless Valves are designed for cyclists seeking optimal performance and ease of use. These valves feature an innovative integrated ball valve system that ensures a quick and efficient sealant filling process.

Built from 7075 aircraft-grade CNC machined aluminum, these valves are both lightweight and robust, ensuring durability even on the toughest rides.

• 230% higher airflow compared to traditional Presta valves
• Integrated lever for easy airflow control
• Stainless steel ball valve for reliable performance
• Serviceable design for long-term use

Tubeless just got an upgrade. Introducing the Muc-Off V2 Tubeless Valves. Stronger, lighter and easier than ever to inflate tires. Take a closer look at what makes the V2 valves better than ever.

HIGHLIGHTS

Precision machined from aircraft-grade 7075 aluminum
Tire insert air flow system that allows the tires to be inflated easier
Includes Valve Core Removal Tool (integrated into spare alloy cap)

FEATURES
7075 Aluminum machined stem
7075 Aluminum machined cap
4mm machined Allen Key slot for easy installation / removal
Includes Valve Core Removal Tool (integrated into spare alloy cap)
Supplied with various rubber bases to optimize fit with multiple rim types
44mm
Suitable for Presta Valves only

HOW TO
Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.

FITTING INSTRUCTIONS

Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WHAT'S INCLUDED?
2x 7075 Aluminium Presta valves
2x Valve caps
2x Locking nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice

Tubeless just got an upgrade. Introducing the Muc-Off V2 Tubeless Valves. Stronger, lighter and easier than ever to inflate tires. Take a closer look at what makes the V2 valves better than ever.

HIGHLIGHTS

Precision machined from aircraft-grade 7075 aluminum
Tire insert air flow system that allows the tires to be inflated easier
Includes Valve Core Removal Tool (integrated into spare alloy cap)

FEATURES
7075 Aluminum machined stem
7075 Aluminum machined cap
4mm machined Allen Key slot for easy installation / removal
Includes Valve Core Removal Tool (integrated into spare alloy cap)
Supplied with various rubber bases to optimize fit with multiple rim types
44mm
Suitable for Presta Valves only

HOW TO
Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.

FITTING INSTRUCTIONS

Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WHAT'S INCLUDED?
2x 7075 Aluminium Presta valves
2x Valve caps
2x Locking nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice

Upgrade your ride with the Muc-Off V2 Tubeless Valves, designed for ease and efficiency. These valves are precision machined from aircraft-grade 7075 aluminum, making them both lightweight and strong.

Featuring a tire insert air flow system with 6 slots for compatibility with most tubeless tire inserts, they ensure seamless air and sealant flow. Each set includes a valve core removal tool integrated into a spare alloy cap and multiple rubber bases for a perfect fit.

• Compatible with Presta pumps
• Available in 10 vibrant colors
• Includes various rubber bases for different rim types
• Easy installation with a 4mm Allen Key slot

Tubeless just got an upgrade. Introducing the Muc-Off V2 Tubeless Valves. Stronger, lighter and easier than ever to inflate tires. Available in 10 eye-popping colors, you can add some custom bling to your ride and be sure to provide the perfect seal for your wheels. Take a closer look at what makes the V2 valves better than ever.

HIGHLIGHTS

Precision machined from aircraft-grade 7075 aluminum
Tire insert air flow system that allows the tires to be inflated easier
Includes Valve Core Removal Tool (integrated into spare alloy cap)

FEATURES
7075 Aluminum machined stem
7075 Aluminum machined cap
4mm machined Allen Key slot for easy installation / removal
Includes Valve Core Removal Tool (integrated into spare alloy cap)
Supplied with various rubber bases to optimize fit with multiple rim types
Assortment of 10 eye-popping colors
Available in 3 different sizes - 44mm, 60mm or 80mm
Suitable for Presta Valves only

HOW TO
Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.

FITTING INSTRUCTIONS

Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WHAT'S INCLUDED?
2x 7075 Aluminum Presta valves
2x Valve caps
2x Locking nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice

Ultimate Bicycle Cleaning Kit for Comprehensive Care

The Muc-Off Ultimate Bicycle Cleaning Kit is the all-in-one solution for keeping your bicycle in pristine condition. Designed for various cycling disciplines, including road, cyclocross, MTB, and daily commuting, this kit provides the essentials for thorough cleaning, protection, and lubrication.

• Includes award-winning Bike Cleaner and an array of brushes for effective cleaning
• Drivetrain Cleaner and All Weather Lube ensure smooth and efficient operation
• Microfibre Cloth and Bike Protect help maintain your bike's shine and prevent corrosion

Muc-Off Ultimate Tubeless Kit for Road Bikes

The Muc-Off Ultimate Tubeless Kit is designed to make your road bike tubeless setup effortless and efficient. This comprehensive kit includes everything you need to convert your wheelset to a tubeless system, ensuring a smooth and puncture-free ride.

• Includes Muc-Off Tubeless Rim Tape and Seal Patches
• Features 60mm CNC-machined black tubeless valves
• Comes with two pouches of No Puncture Hassle Tubeless Sealant

Muc-Off Tubeless Valve Kit V2

The Muc-Off Tubeless Valve Kit V2 is designed for tubeless tire systems, offering seamless airflow and compatibility with most tubeless tire inserts. With its innovative 'Tyre Insert' airflow system, the kit ensures optimal sealant and air flow, enhancing your biking experience. The valve stem and cap are crafted from milled aluminum, providing durability and ease of use.

• Includes tool for removing the valve core integrated in the replacement aluminum cap
• Compatible with different rim types thanks to various supplied rubber bases
• Available in multiple lengths for versatility

Tubeless just got an upgrade. Introducing the Muc-Off V2 Tubeless Valves. Stronger, lighter and easier than ever to inflate tires. Take a closer look at what makes the V2 valves better than ever.

HIGHLIGHTS

Precision machined from aircraft-grade 7075 aluminum
Tire insert air flow system that allows the tires to be inflated easier
Includes Valve Core Removal Tool (integrated into spare alloy cap)

FEATURES
7075 Aluminum machined stem
7075 Aluminum machined cap
4mm machined Allen Key slot for easy installation / removal
Includes Valve Core Removal Tool (integrated into spare alloy cap)
Supplied with various rubber bases to optimize fit with multiple rim types
44mm
Suitable for Presta Valves only

HOW TO
Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.

FITTING INSTRUCTIONS

Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WHAT'S INCLUDED?
2x 7075 Aluminium Presta valves
2x Valve caps
2x Locking nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice

Revolutionary Tubeless Valves for Optimal Performance

Upgrade your cycling experience with the V2 Tubeless Valves, designed with a new Tire Insert air flow system. These valves feature six machined slots at the base, ensuring compatibility with most tubeless tire inserts while allowing sealant fluid and air to flow freely. Constructed from aircraft-grade 7075 aluminum, they offer enhanced durability and reduced weight, making them a reliable choice for avid cyclists.

• Includes three sets of rubber inserts to fit various rim shapes for a perfect seal
• Engineered for superior air flow and sealant compatibility
• Lightweight and strong due to high-quality aluminum construction

Muc-Off V2 Tubeless Valve Kit

Upgrade your cycling setup with the Muc-Off V2 Tubeless Valve Kit, designed for optimal performance on tubeless systems. These valves are crafted from aircraft-grade 7075 aluminum, ensuring they are both lightweight and durable. The innovative Tire Insert air flow system features six slots machined into the base, allowing seamless compatibility with most tubeless tire inserts.

• Includes three sets of rubber inserts for a perfect rim seal
• Enhanced air and sealant flow for improved efficiency
• Suitable for a variety of rim shapes

Tubeless just got an upgrade. Introducing the Muc-Off V2 Tubeless Valves. Stronger, lighter and easier than ever to inflate tires. Take a closer look at what makes the V2 valves better than ever.

HIGHLIGHTS

Precision machined from aircraft-grade 7075 aluminum
Tire insert air flow system that allows the tires to be inflated easier
Includes Valve Core Removal Tool (integrated into spare alloy cap)

FEATURES
7075 Aluminum machined stem
7075 Aluminum machined cap
4mm machined Allen Key slot for easy installation / removal
Includes Valve Core Removal Tool (integrated into spare alloy cap)
Supplied with various rubber bases to optimize fit with multiple rim types
44mm
Suitable for Presta Valves only

HOW TO
Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.

FITTING INSTRUCTIONS

Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WHAT'S INCLUDED?
2x 7075 Aluminium Presta valves
2x Valve caps
2x Locking nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice

High-Performance Tubeless Valves - V2

Experience superior airflow and compatibility with the Muc-Off V2 Tubeless Valves. Designed with a new Tire Insert air flow system, these valves feature six slots machined into the base, allowing seamless integration with most tubeless tire inserts. Crafted from aircraft-grade 7075 aluminum, they offer enhanced strength and lightweight performance, making them ideal for cycling enthusiasts.

• Includes three sets of rubber inserts for versatile rim compatibility
• Optimized for smooth sealant and air flow

The Muc-Off V2 Tubeless Valve Kit in 60mm black is a versatile and essential component for any cyclist looking to optimize their tubeless setup. Designed for easy installation and compatibility with a wide range of rim types, these valves provide a reliable seal to prevent air leaks and ensure smooth rides.

Constructed from high-quality materials, the Muc-Off V2 Tubeless Valves are corrosion-resistant and durable, making them ideal for all cycling conditions. The kit includes a pair of valves, ensuring both front and rear wheels can be equipped, enhancing performance and reliability.

• Compatible with most tubeless-ready rims
• Durable and corrosion-resistant construction
• Easy to install and remove
• Includes valve core removal tool

Tubeless just got an upgrade. Introducing the Muc-Off V2 Tubeless Valves. Stronger, lighter and easier than ever to inflate tires. Take a closer look at what makes the V2 valves better than ever.

HIGHLIGHTS

Precision machined from aircraft-grade 7075 aluminum
Tire insert air flow system that allows the tires to be inflated easier
Includes Valve Core Removal Tool (integrated into spare alloy cap)

FEATURES
7075 Aluminum machined stem
7075 Aluminum machined cap
4mm machined Allen Key slot for easy installation / removal
Includes Valve Core Removal Tool (integrated into spare alloy cap)
Supplied with various rubber bases to optimize fit with multiple rim types
60mm
Suitable for Presta Valves only

HOW TO
Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.

FITTING INSTRUCTIONS

Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WHAT'S INCLUDED?
2x 7075 Aluminum Presta valves
2x Valve caps
2x Locking nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice